107. Nose radius and radial force

CNC: Turning – nose radius, its effect on radial cutting force
When turning, the axial component of the cutting force is pushing the part against the work holding device, which is a solid barrier. The radial component is pushing the part against air, which is not a barrier.
You need to reduce the radial component of the cutting force if you want to: 1. Reduce part bending in long parts (with a high length to dia. ratio) 2. Reduce distortion in thin walled parts.

Radial cutting force increases as the tool nose radius increases. As the picture shows, with a tool approach angle of 90 degree and a zero nose radius (which is not possible in practice – it may be 0.1 mm, 0.05 mm or lower, but never zero), at the extreme, there will be no radial force at all, and all the force will be axial.

Action point Nose radius selection does not merely depend on the radii that you want on the part. It decides whether you’ll get a part within tolerance. Decide it very carefully. Here’s another post on the topic.
Bovine traffic on Bangalore roads
I recently saw this placid bunch of cows walking peacefully down the road near my office. Just like a good Indian road user is supposed to do, they were walking down the middle, straddling the lane divider line. Indians (including Indian cows, evidently) believe that the white line down the center is meant for driving ON, not on either side of.

Bangalore (like most cities in India) has a lot of cows hanging around on the roads. Many people across the country prefer to have fresh milk delivered to them every morning by a neighbourhood milk producer who has a few cows, instead of getting it in packets from large corporate dairy farms. The cows get milked and fed at home, and are then let loose to roam around the neighbourhood, presumably to get some exercise and stuff like banana peels that people throw away. They have a great homing instinct, and make their way home by the evening.

As a cyclist and pedestrian, I’d rather see more cows on the roads than automobiles. Cows are benign, peaceful, calming, and I like the Mooing from their front, can avoid the dung from their backsides. Automobiles are the opposite of benign and calming, and I can’t avoid the honking from their front and the poisonous gases from their backsides.
Ever seen this Ogden Nash poem ? The cow is of the bovine ilk one end is moo, the other milk.

Leave a Reply