65. CNC program & machine movement

CNC – What does the controller do with a CNC program ?

Ever wondered what actually happens to the various commands in a CNC program when it is run ? How do various parts of the machine move in response to the commands ?

This diagram shows what happens to the various commands. The controller is the ‘chief brain’ of the machine, and it has a group of ‘assistant brains’, the PLC and drives. The chief and assistant brains have computers, digital logic, and decision making ability. Their job is to drive a bunch of devices like spindle and axes motors, coolant motor, stack lights, etc. These devices are dumb – have no logic, and no decision making ability.

Pic. source: CADEM NCyclopedia CNC training software

The controller reads a line of the NC program and interprets it, then routes various commands in the program to appropriate assistant brains. The assistant brains in turn control the various devices like the spindle and axes motors, coolant pump, etc. They get feedback from sensors (like encoders and limit switches) on the devices and ensure that the original command from the controller is executed properly.

Some examples:

If there is an X axis motion command (e.g., G01 X50. F200.), the controller sends the distance and velocity commands to the X axis drive. The drive in turn moves the X axis motor by the desired distance at the commanded feed rate. If there is a spindle ON command, the controller sends the command and spindle speed to the spindle drive. The spindle drive starts the spindle at the commanded spindle speed. If there is a coolant OFF command, the controller informs the PLC which in turn switches off the coolant motor. If there is a tool change command, it informs the PLC which starts a sequence of actions of various devices that are needed to change the tool.

Text and pics. source: CADEM NCyclopedia multimedia CNC training software.

Etc.

CNC turning, 900 years ago ?

I saw these pillars in temples in Belur and Halebid, 200 km. from Bangalore. They look like they were turned on CNC lathes. Not possible, of course, since the temples were built in 1116 CE, 900 years ago.

I read some historian’s theory that they did use lathes to turn these pillars, and got all excited about this, being a machining guy. It turned out that the info was wrong, and that they are actually carved by hand, impossible as it seems. Other historians argue that there are similar pillars elsewhere carved in walls (not free-standing), and these obviously cannot be turned. Also that craftsmen even today carve such pillars by hand.

Maybe for anyone who could carve amazingly intricate sculptures like the one here, of the woman with the mirror in Belur, the circular pillars were child’s play ?

Leave a Reply