Production data on Andon boards

Stale data on Andon boards is as useless as stale bread

The purpose of Andon boards is to display information to everyone on the shop floor to:

– Provide instant production feedback on targeted and achieved production –

Highlight production problems so quick action can be taken to fix them

– Reduce downtime and rejections, ensure on-time delivery

– Improve team motivation and morale

None of these is achieved if the information on the Andon boards is not up-to-date or accurate. The typical method of updating the displays is through periodic manual data collection, compiling and entry. The longer the delay between updations, the more stale the data is, and the less useful in fixing problems. The longer you take to fix a production problem like a machine breakdown or high rejections, the costlier it gets. Updating every hour is more useful than updating every shift, and updating in real-time is ideal, so people know about a problem the moment it happens. The latter however is only possible with automated production monitoring systems.

If you are unhappy with your current shop floor data display method, maybe you should think of an automated system that monitors machines 24/7 and updates data continuously on Andon boards. LEANworx machine monitoring software does this, for any type of machine – CNC, manual machines, transfer lines, PLC based machines. It works on Industry 4.0 design principles, and also has inbuilt capabilities of TPM software, Lean software and OEE software.

Oh, by the way, stale bread is actually not as useless as stale data. Here’s an article that says the fungus on the bread might actually be a good way to treat IBD (Inflammatory Bowel Disease).

Want to know more about how LEANworx can help you discover hidden profits ? Click here.

Etc

Astrologer seeing stars ?

One Sunday morning, cycling around doing grocery shopping, I saw a long que, some commotion and a traffic jam in front of a building. I asked around, and found that the que was for getting an appointment to meet an astrologer. If you wanted to meet him, you stood in line for 2 hours, met his secretary, and got an appointment that enabled you to meet him after 6 months.

As you can see from the picture, the que (yellow line) starts at the side of the building, goes around to the front, then up 3 floors to the astrologer’s office. There’s even a policeman to control the crowd. It turned out that the astrologer had recently appeared on a TV program and predicted something correctly, and the sudden increase in business was because of that.

I’m sure the guy himself had not predicted his own good fortune. I was thinking maybe I should have trained to be an astrologer instead of messing around with CNC machines – in this lifetime I’m definitely not going to see a que like that outside my office, waiting to buy our software.